Scrappy Table Mat

I love making these, they use up scraps and make the table pretty. 

I make them in all kinds of sizes, really what fits the scrap blocks or pieces I'm using 

I used them for small serving mats (under chip bowls etc) I put plants on them, picture, basically I used them where I want to protect a table, shelf etc. 

I don't use batting in mine unless its something I want to use to put a hot pot on. 

You need scrap blocks and a binding an inch larger on all sides 

Make your patchy top piece. 

Place in the center of the backing (backing wrong side up)

Pin and quilt. I usually follow grid lines, but do what you like. Leave the corners unsewn and only sew on the top piece. 

Trim the sides if you need to. Make sure there is 1 inch on each side.

Tuck the corners of the backing under the front like shown below

Fold the backing in half until it meets the edge of the front. You can use clips or iron if you want.

Fold the backing in half again, this time onto the front. The corners should be nicely mitered. 

Hand or machine stich. 

 Enjoy!

TriPatch Pot Holder

 EPP triangles, some pretty scraps and Voila! Pretty pot holder!

I used the following:

60 x  2 inch triangle papers by Sue Daley Designs

2 inch Sue Daley acrylic template (optional)

Glue Pen

Assorted 2.5 inch scraps

Needle, thread, scissors. 

Batting: 11x11

Backing: 13x13 square

Start by taking 6 of your triangle papers and cut in half  for the edge pieces. Make sure you have 6 in one direction and 6 in the opposite direction. Cut your fabric at least 1/4 inch larger, cut out and glue baste or stitch baste if you prefer to the papers.

Using the 54 triangle papers, cut our fabric triangles at least 1/4 inch larger all the way around. Glue or stitch baste to the papers. 

Collect all your sewing supplies

Arrange them how you want it to look. 9 triangles & 2 edges per row. 

I like to sew these in rows, then sew the rows onto each other. 

Isn't it pretty!

Remove all the papers. I find a 4mm knitting needle helps. If stitch basting remove the basting stitches.

Once all the papers are out, press really well, making sure to press the sides the way they were folded for a nice edge

Place pressed top on the batting. Quilt as desired. I stitched long the diagonal lines. 

Trim the excess batting. 

Place backing wrong side up on your table. Center the top on the backing and trim to have 1 inch of backing all the way around. 

I pin the edges of the patchwork so it stays in place for the next part. 

Press the backing in half towards the front piece all the way around. 

Fold it again, this time onto the patchwork front. Clip or pin in place. 

You can machine or hand stitch the folded binding edges, I prefer hand stitching. 

To finish, I quilted the row of triangles and around the edges of the binding so it was all quilted together. 

Finished!!!!!!!!!!!!!!!

If you would rather sew this by machine, use a 60 degree triangle ruler and machine stitch them together

I used various prints I had in stash from Darlene's Favorites by Darlene Zimmerman, Robert Kaufmann Fabrics for the front. Back is medium dots by RJR. 

Check out www.victorystitches.com for EPP papers, notions and fabrics 

This pattern was written by me, Vall for victory stitches. It can be used for personal use or if you want to sell the finished item. Do not copy my tutorial for print or resale. If making or sharing this pattern, please do the right thing and give credit. Thanks, Vall. 

 

Patchwork Wash Mat

So simple and so practical

Mine was 12 inch x 16 inch

12 squares cut 4.5x4.5 inches

1 piece of old towel cut 13x17 inches

Arrange squares in a pleasing pattern in 3 rows of 4

Sew the rows of 4 together

Sew those rows together

Give a good iron. 

Lay down the towel, place the patchwork good side down on the towel. 

Use lots of pins and pin around, the towel will like to slide around so plenty of pins helps. Make sure to mark a 4 inch turning gap. This gap you will leave un-sewn.

Start sewing at one turning gap marker, sew all the way around to the other gap marker. Make sure to reverse stitch at the beginning and end. 

Clip corners and turn right side out. 

Make the corners look good and give it a good iron. Make sure to iron the turning gap so it folds nicely. 

Top stitches all the way around. If the corners are too bulky, skip the corners and just sew down each edge. 

Sew a top stitch along the center of the patchwork to secure both sides of the project together.

Finished!

LITTLE FLOWER MAT

This weekends project. English paper pieced hexi flowers and leaves using Sue Daley Papers and Templates. Material is Tilda's Bird Pond Collection